1 Toneoptic rpm mechanism

3 Record side panels

2 Wall bracket mounts (optional/if purchased)

2 Record dividers (for 7", 10", or 12" vinyl)

1 Bottom felt mat

2 Backside felt protectors (so your mint ratings remain mint forever)

3 bags of screws:
6mm SHORT
10mm MEDIUM
12mm LONG (only used for optional wall mounts)

Extra fasteners have been included in all bags.

1 installation manual

1 big hug (in a non-awkward way) for becoming part of the Toneoptic family

Excluded: The correct screws for your particular surfaces or walls (GRK, toggle bolts, etc). Please purchase separately from your local hardware store prior to mounting in order to ensure a safe install of your units.

The rpm measures 17.25” in depth, 18.61” in width (19.25" with wall mounts), and 15.7” in height (16" with records in it; the wall mounts are 15.125" tall).

With the drawer fully extended out, the unit measures 30.5" in depth.

The unit weighs ~26.9 lb when empty.

(One batch of records to fill the rpm can weigh up to ~50 lb so make that a total of up to ~77 lb per fully-stocked unit.)

The rpm is made out of powder-coated aluminum and comes in matte black and gloss white finishes.

Built with individuality and modularity in mind, units can be installed hanging on walls or mounted sitting on flat surfaces. It takes between 15 to 30-minutes to install your first unit with ease. As with any large wall-mounted furniture piece, we recommend professional installation. See our YouTube channel for a video on how to put the rpm together and the manual for mounting tips.

Choose a bottom-mount unit if you have a platform to securely mount it to that can withstand the ~80 pounds of weight easily and safely.

Bottom mount units are made for sturdy surfaces that allow the unit to extend without the danger of a traditional, loose, shelving system tipping over.*

If this does not describe your environment, then the wall mount units are your rpms of choice as they can be installed on most walls using the correct screws for your particular wall (GRK, toggle bolts, etc).

*If you have a traditional shelf not made to support the weight, you can install the wall brackets for security and have the unit appear as if it were on the shelf.